Ilios Assembled KitComplete Ilios Kit in its assembled form

Ilios for Research

The best configuration for prototyping or research. This kit utilizes the X - Y Laser upgrade and although operates slower than a projector, produces more accurate results.

Price: 3200,00 €

Available kit delivery options
Available Upgrade Options
Available Electronics
SKU: GFY-G-3DP-00001G
Ilios Assembled Kit
Ilios Assembled Kit
Bone Print
Crying Man figurine
Motion Mechanics of the Ilios Kit
Ilios Kit motor assembly
Motor Mechanics
Seasons Making Of
Motion Assembly Included Parts
Feet Assembly Included Parts
Lift Assembly Parts
Projector Mount Assembly Parts
Top Frame Assembly Parts
Assembled Crate
VAT Assembly Parts



Above is a video of a custom setup for a customer. Note that the default configuration comes with a Large VAT & Lift.

Please note that due to the large weight and quantity of parts required for the assembly of each unit and since all kits are assembled by hand, the lead time for each order (after the parts have been ordered) is 25 working days.

Assembled Kits are shipped By Air directly from the airport and there could be additional charges depending on your region about which you shall be notified upon shipment. Note that you may need to arrange for local pickup of the crate from the airport unless specified otherwise. For more information Contact Us directly.

This kit was specifically put together for those who are developing new objects and need to experiment with different configurations, while having the best possible accuracy and build volume. The kit utilizes the X - Y Laser assembly, which although operates slower, generates highly detailed results. The kit already contains the resins and pigments mostly suited for prototyping applications.

To find out about each option available for the Kit, please read the product description in the Accessories section of the shop. Each addition is described and explained there.

If you would like a custom solution for your application, please check out the Ilios Custom Kit where every option can be selected based on your needs.


The Ilios Control Unit as well as the Custom Power Supply and the UI Module are already included in the initial price of the kit. Our newest Ilios Control Unit can control up to 4 motors, being Servos or Steppers, can receive multiple sensor signals, control pumps as well as manipulate internal Relay connections for high or isolated loads and do much more through its custom firmware, written specifically for Ilios 3D printers.

The Ilios UI unit will make your Ilios 3D printer a Stand-Alone unit and shall provide such features as WiFi and Ethernet connectivity, Color Touch Screen interface, Print directly from a USB drive or a microSD card, Automated Firmware updates and much more.

Due to a large demand and better reliability, the option for Stepper Motors uses the High Torque motors. These motors shall provide you with accurate results and give strong movement while building small or large models.


Smart Servo Motors

Smart servo MotorBesides the Stepper Motors which are most commonly used for controlling any motion, you can now also choose a much more reliable and accurate alternative. The Smart Servo motors unlike normal stepper motors, know exactly where they are at all times and even if you try to manually move the motor while it is working, it shall spring back to its defined position. The resolution of these motors is just as good as the High Torque Stepper motors but with an exceptional addition of never loosing a single step when you need that exact Micron Level accuracy and reliability.

XL VAT & Lift

The Laser setup includes the XL VAT and Lift which utilizes a build area of 340mm x 440mm however since the XL VAT can barely fit into the interior of the machine, there is no Sliding mechanism for it. The VAT uses standard springs to dampen the motion.

Kit Includes

  • Base Ilios Kit
  • Color Touchscreen Interface
  • WiFi & Ethernet enabled
  • Print from a USB drive or SD Card directly
  • Ilios 3D Suite compatible
  • XL VAT & Lift For Laser Setup
  • Dual Lift Metal Ball Bearing Spindles & Slides
  • Z - Plus Build height of 38cm
  • X - Y Laser Assembly
  • 1kg of General Purpose Resin
  • 1kg of Hard & Tough Resin
  • 1kg of Elastic Resin
  • 15g of Red Opaque Pigment
  • 20g of White Opaque Pigment
  • 10g of Black Opaque Pigment
  • 453g of PDMS & Hardener


The plastic parts on this as well as all other Ilios 3D printers are made from recycled materials. Plastics are used from water bottles, bottle caps, plastic jugs and recycled 3D printer parts. Coloring is added and some additional mixtures to regain the structure of the plastic and then parts are reprinted, helping the environment. The recycling is done directly in the Ilios workshop. You can read more about the process through our Facebook page, within the time line history.

Additional Information

If you have any questions about the kit or anything related to it, please visit the Forum and ask away. Someone shall help out as soon as possible. If all else fails, you can always Contact Us. You can also visit the FaceBook page for additional media.

Recommended for you

Page   1 of 0  


There are yet no reviews for this product.

My Cart

Cart empty
Order a Sample

Product Reviews

5.00 STARS
Just got done building this kit, so I can attest to the assembly time and fit up but not the ...
- fdtank81
5.00 STARS
It's a best option at the moment to cover the VAT for layer detaching and is works absolutely smooth until ...
- clockworkorange
5.00 STARS
I've started with this resin and it worked great for me.
Model comes out very strong, can compare it with ...
- clockworkorange

We Accept

Supported By